To Order Call 1-541-426-3317
To Order Call
1-541-426-3317

(541) 426-3317 or cell (541) 263-1008

Woodworking shop located at:
64934 Alder Slope Rd.
Enterprise, OR 97828
MATERIALS:
The Heirloom Screen Door Co. uses all clear, 5/4” poplar resulting in a finished door thickness of 1 1/16” and will stand proud of the typical brick mould by 1/16".

STILES:

The stiles (long vertical pieces) are 3-1/2" wide and the moulding which is added to the inside is 7/8" wide making the overall width 4-3/8".

RAIL:
Bottom rail is 7-1/2" with a 5" tenon and top rail is 5" wide with 3" tenon and the spindle rails are 1-3/4" with 1-1/2" tenon.

MOULDING:

The moulding is L shaped and adds 7/8” to the inside of all rails and overlays the face by 3/16" which adds considerable strength as well as functional good looks.
This moulding is 5/16” short of flush on the backside of stiles and rails which allow the screen moulding to be mounted flush.

SCREWS:
Threaded metal inserts and Stainless Steel screws are used to install the screen moulding.

Construction Detail
The following pictures show the screen door parts and illustrate various stages of construction.
Symphony Door with horizontal, raised panel and spindle rail.
TRIM MOULDING DETAIL
Screen is attached to this piece
TRIM MOULDING DETAIL
Solarian Bracket
TENON DETAIL
Spindle rail,1 ½” tenons
5” Center rail, 3” tenons
71/2” bottom rail, 5” tenon
LARGE TENON DETAIL
7 ½” bottom rail with 5” tenon

SCREEN CLOSE UP
Mounting detail
Home Stock Doors Hardware Brackets Gallery Construction Details Ordering About Us Contact Us
© 2009 Heirloom Screen Door Company - All rights reserved - Prices are subject to change without notice.